【Pre Order】T1 Mini 3 | Fastfold Titanium Wood Stove for Solo Camping | POMOLY New Arrival 2026

T1 Mini 3 | Fastfold Titanium Stove

Internal Hidden Hinge

Titanium detachable baffle

Reinforced structure top cover

Strengthening firebox

New air intake baseplate

Overall 1mm thickness titanium

New titanium spark arrestor

Adjustable and detachable smoke damper

Hollow whole plate folding stove legs

(Black walnut veneer)

WHAT'S INCLUDED:

T1 Mini 3

Titanium Chimney

Chimney Damping Base

Spark Arrestor with 3 Rings

Cut Resistant Gloves

Stove Bag

Titanium Chimney System - 6cm / 2.36in
40g / 1.4oz ultralight spark arrestor, three detachable rings for wind ropes fixing.

Reduce the hollow area, the convex is good for catching sparks.

Upgraded to embedded inverted. (Used with titanium section chimney)

Base Edge Reinforcement Ring

We added a thicker reinforcement ring below the chimney damper to make the edge more resistant to deformation.

New Fixed Knob

The pre-bending design makes it easier to fix the stove side panel.

 New Baseplate with Adjustable Air Intake

Increase the intake air volume of the firebox.

Tail air intake can reduce carbon deposits caused by incomplete burning of firewood.

New Reinforced Structure Top Cover

The three-dimensional hollowed-out reinforced plate minimizes the deformation of the top cover.

Reduce the direct contact between the flame and the top central area to avoid local high temperature and local low temperature, resulting in uneven heating of the top cover. 

After testing, the reinforcing plate can not only strengthen the top cover, but also maximize the heating range of the top cover.

Tips: The stove must be fixed with guy-lines during burning, if the chimney is not fixed, the chimney will sway from side to side, which will cause the top cover of the stove to rise and fall continuously, which will eventually cause the top cover to warping.

Titanium Detachable Baffle

The detachable baffle can minimize the entry of sparks into the smoke pipe and reduce the risk of sparks burning the tent.

New Reinforced Bottom Plate

Under the condition of ensuring light weight and portability, T1 Mini 3 3.0 adopts a double-row three-dimensional reinforced bottom plate. The 23 welding points minimize the deformation of the furnace after burning. 8 hollow octagons can enhance the heat dissipation effect.

After the stove has been burned for many times, the bottom of the firebox will be partially warped (Caused by thermal expansion and contraction), but under the action of the external reinforced plate, the whole firebox is still in a state of no deformation, which is convenient for the next installation and use.

New Folding Legs

T1 Mini 3 legs are made of a whole piece of titanium plate with wood, which has a stronger bearing structure. The walnut wood can enhance the rigidity of stove legs

The raised design in the middle of the stove legs are suitable for uneven ground.

New Stove Door

The door of the T1 Mini 3 3.0 stove was widened and heightened so that large pieces of wood to enter the stove easily. 

The edge of the door was 90-degree folded and 360-degree folded processing. The 90-degree edge can strengthen 

the structure of the door frame, and the 360-degree folding can keep the door frame flat with the bottom of the stove. 

We can use the ashes rake to remove the ashes after burning.

More Precise Hinges

90 Degree Bend Internal Hidden Hinge

In order to reduce the gap between the hinges and greatly reduce the risk of smoke leakage, we have remanufactured a new hinge mold, making the 3.0 version of the hinge more precise and tight.