T-Brick Mini | Portable Titanium Wood Stove for Solo Hot Tent Camping | POMOLY 2022 New Series

Small but powerful

This is T-Brick Mini.

Overall 1mm thickness pure titanium

New titanium spark arrestor

Titanium detachable baffle

Adjustable and detachable damper

Three-Dimensional reinforced structure top
Side air intake side panel

Free switching side panels
 Unique octagonal glass side panel
Strengthening stove body

Hollow whole plate folding stove legs

The Best way to roll up titanium chimney:

New ultralight titanium spark arrestor

Comes with wind rope fixing ring

Overall TA1 1mm thickness pure titanium

Baffle and Inner panel of intake side panel (0.6mm)

Side panel air intake

Maximum combustion efficiency

Three-Dimensional strengthening whole stove body

Enhance the rigidity of the stove and minimize deformation

Hollow whole laser cutting plate folding stove legs

Non touch welding structure, enhance stability

Titanium detachable baffle

Increase the maximum heat output of stove

Surface polishing treatment
Improves fatigue resistance of metal

Octagonal glass side panel
Observe the burning situation

Adjustable and detachable damper
Control the intensity of the wood burning

Adjustable sliding air intake Control
Control wood burning rate

Folding and panel design
Portable design

WHAT'S INCLUDED:

T-BRICK Mini Stove

Titanium chimney

YKK-Zipper stove bag

Smoke damper

Spark arrestor with 3 rings

Cut resistant gloves

Detachable baffle

*Tools (titanium screw and wrench)

 NEW SPARK ARRESTOR

40g / 1.4oz Ultralight spark arrestor, Sandblasted surface treatment. 

Three detachable rings for wind ropes fixing.

Reduce the hollow area, the convex is good for catching sparks.

NEW STOVE TOP COVER

The three-dimensional hollowed-out reinforced plate minimizes the deformation of the top cover.

Reduce the direct contact between the flame and the top central area to avoid 

local high temperature and local low temperature, resulting in uneven heating of the top cover. 

After testing, the reinforcing plate can not only strengthen the top cover, but also maximize the heating range of the top cover.

Tips: The stove must be fixed with guy-lines during burning, if the chimney is not fixed, the chimney will sway from side to side, which will cause the top cover of the stove to rise and fall continuously, which will eventually cause the top cover to warping.

DETACHABLE BAFFLE

The detachable baffle can maximize the burning heat efficiency of the wood. The air enters the stove through the side air intake panel, which can allow the smoke generated by the burning wood to be reburnt, the heat can be concentrated inside the stove to increase the temperature of the stove. At the same time, there will be less smoke from burning wood.

REINFORCED BOTTOM PLATE

Under the condition of ensuring light weight and portability, T-BRICK adopts a double-row three-dimensional reinforced bottom plate. The 25 welding points minimize the deformation of the furnace after burning. 12 hollow octagons can enhance the heat dissipation effect.

After the stove has been burned for many times, the bottom of the firebox will be partially warped (Caused by thermal expansion and contraction), but under the action of the external reinforced plate, the whole firebox is still in a state of no deformation, which is convenient for the next installation and use.

NEW FOLDING LEGS

T-BRICK legs are made of a whole piece of titanium plate, which has a stronger bearing structure. 

The raised design in the middle of the stove legs are suitable for uneven ground. (More stable than T1)

NEW SIDE PANELS

Compared with the T1 series, the side panels of T-BRICK can be switched freely. 

Inside the tent, we can face the glass side panel and observe the burning of the wood. 

The glass side panel also provides light in your hot tent.

The new secondary intake side panels have been redesigned to be stronger and less deformable after burning.

NEW STOVE DOOR / TAIL PLATE

The door of the T-BRICK stove was widened and heightened so that large pieces of wood to enter the stove easily. 

The edge of the door was 90-degree folded and 360-degree folded processing. The 90-degree edge can strengthen 

the structure of the door frame, and the 360-degree folding can keep the door frame flat with the bottom of the stove. 

We can use the ashes rake to remove the ashes after burning.

The reinforcing plate of the tail plate can ensure that the tail plate will not be deformed.

NEW TOP COVER LOCK CATCH

The lock catch on the T-BRICK Stove was designed so that side shelves can be used with it. 

When used with the side shelves, it can also enhance the stability of the stove.

FRONT DOOR AIR INTAKE

T-BRICK stove has a door with a slidable air intake and an octagonal glass, so that you can fine-tune the burn rate. 

The area of the air intake was increased by 15%, which allows the stove to heat up the tent in a very short time in the cold winter.

NEW STOVE BAG

The new designed stove bag is more durable, with YKK zipper, more portable.