【Pre Order】T-Brick 2.0 | Extended Version | Titanium Stove for Multiplayer Hot Tent Camping | POMOLY New Arrival 2025

T-Brick 2.0 Extended Version

One Stove. Two Modes.

Expandable 1+1 Modular Design
Upgraded Titanium Chimney System (7cm)
Upgraded Titanium Spark Arrestor
Redesigned Secondary Air Intake Side Panels
Upgraded Firebox Bottom Plate
Constructed from 1 mm Grade 1 Titanium (TA1)
Detachable Titanium Baffle
Adjustable & Removable Chimney Damper
Reinforced Three-Dimensional Top Plate Structure
Interchangeable Side Panels
Exclusive Octagonal Glass Side Panels
Reinforced Firebox Construction
Extended Front Air Intake Control
Ultralight Titanium Side Shelves
One-Piece Folding Titanium Legs
Includes 2 Titanium Side Panels & 2 Glass Side Panels

TWO MODES | T-BRICK MAX 2.0 Titanium Stove

Extended Firebox Configuration
In the extended configuration, the larger firebox accommodates more fuel, delivering longer burn times than the T1 and T-Brick series.

Optimized for Cooking Performance
For maximum heat output and combustion efficiency, install the two titanium side panels on the lower section of the stove and position the glass panels on the upper section. The integrated secondary air intake system in the titanium panels helps promote cleaner, more efficient combustion.

Optimized for Fire Viewing
For enhanced fire visibility and a more immersive campfire atmosphere, install both glass side panels on the same side of the stove. This configuration provides a larger viewing area and a more dramatic flame display.

What’s Included:

T-Brick 2.0 Wood Stove (Extended Version)
Titanium Roll Chimney
Storage Bags
Titanium Damper Base
Titanium Spark Arrestor with 3 Guyline Rings
Cut-Resistant Gloves
Detachable Titanium Baffle
Titanium screw & Wrench

2.76 in (70 mm) Titanium Chimney System

Ultralight spark arrestor with three detachable guyline rings for added stability in windy conditions.

The reduced open surface area and raised structure help trap sparks more effectively for safer operation.

Upgraded with an inverted embedded connection design for improved sealing and stability when used with titanium chimney sections.

Reinforced Top Plate Structure

The 3D reinforced cut-out support plate helps minimize warping of the top cover during high-temperature use.

The redesigned structure reduces direct flame concentration on the center of the top plate, helping prevent uneven heat distribution caused by localized hot spots. Testing has shown that the reinforcement plate not only improves structural rigidity, but also enhances heat distribution across the cooking surface.

Usage Tip: For safe operation and long-term durability, the stove should be secured with guy lines during use. If the chimney is left unsupported, it may sway in the wind, causing repeated movement and heat stress on the stove body. Over time, this may lead to warping of the top plate.

2.0 Firebox Bottom Plate 

Additional side air inlets improve airflow distribution throughout the firebox, helping keep the glass cleaner while enhancing combustion efficiency, especially toward the rear of the stove.

Detachable Titanium Baffle

Reinforced Bottom Plate 

While maintaining a lightweight and portable design, the T-Brick 2.0 features a dual-row 3D reinforced base plate structure.

The 25 welded reinforcement points help minimize warping of the stove body during repeated high-temperature use, while the 12 cut-out octagonal vents improve overall heat dissipation.

After extended use, slight warping at the bottom of the firebox may occur due to thermal expansion and contraction. However, the external reinforcement structure helps maintain the overall stability of the firebox, making future setup and use easier.

Foldable Legs

The T-Brick 2.0 features foldable legs formed from a single piece of titanium plate for improved load-bearing strength and durability.

The raised center support design improves stability when the stove is used on uneven ground.

2.0 Reinforced Side Panels

Compared with the T1 series, the T-Brick 2.0 Extended Version features four interchangeable side panels, allowing users to configure the stove based on their preferred balance of performance and fire visibility.

The octagonal glass panels provide an excellent view of the flames while adding ambient light and atmosphere inside the shelter.

The redesigned secondary air intake panels are reinforced for greater structural rigidity and improved resistance to heat-related deformation during repeated use.

Enlarged Stove Door

The stove door has been widened and increased in height, making it easier to load larger pieces of firewood into the firebox.

The door frame incorporates a 90-degree bent reinforcement design combined with a rolled-edge construction. The reinforced bends increase structural rigidity, while the rolled edges create a tighter, more precise fit between the door and stove body.

Usage Tip: When using the stove with longer or heavily loaded firewood, avoid opening the lower door to prevent logs from shifting or falling out of the firebox.
For refueling, use the upper loading door whenever possible. During normal operation, keep the upper door closed except when adding firewood.

Together with the redesigned rear panel, the upgraded structure improves durability, reduces warping, and enhances overall stove performance.

Top Plate Locking Catch

Designed for side shelf compatibility, the top plate locking catch helps reinforce the stove structure and improve stability during use.