Dweller Max Ti 3 | Titanium Wood Stove | POMOLY New Arrival 2024

-53%

Dweller Max Ti 3

Compared to the Dweller Max 3, the Ti version has a 53% decrease in weight. We designed the variable diameter titanium chimney to decrease the storage volume, which means more chimneys can be stored in the firebox. Additionally, we can install the titanium chimney upside down to prevent creosote from seeping through the chimney during combustion. The newly added damped chimney controls the exhaust, which in turn controls the rate at which the furnace burns, and when we adjust the valve to reduce the rate of fire, the Dweller Max can keep burning longer at night. The huge fireproof glass combined with the air curtain of the front door can make the flame jump more, and the secondary air intake inside can make the firewood burn more fully. In addition to tents and RVs, Dweller Max Ti 3 can also be used in many places, such as forest cabins, camps, underground garages, etc.

WHAT'S INCLUDED:

Dweller Max Ti 3

9 Titanium Section Chimneys

1 Chimney with Spark Arrestor

Chimney Fixed Ring

Fire Poker Stick

Stove Bag

Variable Diameter Inverted Titanium Chimney

The inverted chimney can prevent the creosote produced in the burning process from seeping out from the chimney joint.

Drawer Lock

The locks on both sides ensure that the drawer will not fall due to vibration during burning.

Stove Door Handle

Larger Refractory Glass

Using three refractory glasses can not only enhance the atmosphere, but also observe the burning situation.

Unlike other POMOLY stoves, the direct visual experience brought by the flame through the huge glass is extremely attractive.

Precision Machining

The Dweller Max Ti 3 wood stove is made of more sophisticated mechanical equipment to ensure that the gap between each part is reduced as much as possible, to prevent smoke leakage, and to make the wood stove body stronger.

Air Curtain Technology

Bottom Air Intake and Slide Control

We changed our usual design and adopted the bottom air intake method. This design allows each firewood in the firebox to be fully burned. Compared with the horizontal air intake, this design is simpler and more effective.

The gap between camping wood stove parts is properly controlled. The switch at the bottom can provide maximum firepower when sliding to the left, and the air intake can be completely cut off to the right.

Secondary Air Intake and Baffle

Drawer Type Ash Collecting Box