T-Brick Ultra | Portable Titanium Wood Stove | Camping Tent Stove for 3-6P | POMOLY 2022 New Series

Hi, This is T-BRICK Ultra.

Our strongest titanium stove yet.

Also the largest single one.

Firewood capacity increased by 59% 

(T-BRICK 14L / T-BRICK Ultra 22.3L)

Overall 1mm thickness pure titanium

New titanium spark arrestor

Titanium detachable baffle

Adjustable and detachable damper

Three-Dimensional reinforced structure top

Side air intake side panel

Free switching side panels

 Unique octagonal glass side panel

Strengthening hot tent wood stove body

8 Front door air intake

Hollow whole plate folding titanium stove legs

New ultralight titanium spark arrestor

Comes with wind rope fixing ring

Overall TA1 1mm thickness pure titanium

Baffle and Inner panel of intake side panel (0.6mm)

Titanium detachable baffle

Increase the maximum heat output of titanium tent stove

Side panel air intake

Maximum combustion efficiency

Three-Dimensional strengthening whole titanium wood stove body

Enhance the rigidity of the camping wood stove and minimize deformation

Hollow whole laser cutting plate folding camping tent stove legs

Non touch welding structure, enhance stability

8 Lengthened front door air intake

Increase the air intake.

WHAT'S INCLUDED:

T-BRICK Ultra portable wood stove 

Titanium chimney

YKK-Zipper portable tent stove bag

Titanium smoke damper

Titanium spark arrestor

*Tools (titanium screw and wrench)

Cut resistant gloves

 NEW SPARK ARRESTOR

40g / 1.4oz Ultralight spark arrestor, Sandblasted surface treatment. 

Three detachable rings for wind ropes fixing.

Reduce the hollow area, the convex is good for catching sparks.

NEW portable wood burning stove TOP COVER

The three-dimensional hollowed-out reinforced plate minimizes the deformation of the top cover. Reduce the direct contact between the flame and the top central area to avoid local high temperature and local low temperature, resulting in uneven heating of the top cover. After testing, the reinforcing plate can not only strengthen the top cover, but also maximize the heating range of the top cover.

Tips: The stove must be fixed with guy-lines during burning, if the chimney is not fixed, the chimney will sway from side to side, which will cause the top cover of the stove to rise and fall continuously, which will eventually cause the top cover to warping.

DETACHABLE BAFFLE

The detachable baffle can maximize the burning heat efficiency of the wood.

The air enters the stove through the side air intake panel, which can allow the smoke generated by the 

burning wood to be reburnt, the heat can be concentrated inside the wall tent wood stove to increase the 

temperature of the wall tent stove     . At the same time, there will be less smoke from burning wood.

REINFORCED BOTTOM PLATE

Under the condition of ensuring light weight and portability, T-BRICK adopts 

a double-row three-dimensional reinforced bottom plate. The 25 welding points minimize the 

deformation of the furnace after burning. 12 hollow octagons can enhance the heat dissipation effect.

After the tent wood burning stove has been burned for many times, the bottom of the firebox will be partially warped (Caused by thermal expansion and contraction), but under the action of the external reinforced plate, the whole firebox is still in a state of no deformation, which is convenient for the next installation and use.

NEW FOLDING LEGS

T-BRICK legs are made of a whole piece of titanium plate, which has a stronger bearing structure. 

The raised design in the middle of the backpacking tent stove legs are suitable for uneven ground.

NEW SIDE PANELS

Compared with the T1 series, the side panels of T-BRICK can be switched freely. 

Inside the tent, we can face the glass side panel and observe the burning of the wood. 

The glass side panel also provides light in your hot tent.

The new secondary intake side panels have been redesigned to be stronger and less deformable after burning.

NEW STOVE DOOR / TAIL PLATE

The door of the T-BRICK stove was widened and heightened so that large pieces of wood to enter the lightweight tent stove easily. 

The edge of the door was 90-degree folded and 360-degree folded processing. The 90-degree edge can strengthen 

the structure of the door frame, and the 360-degree folding can keep the door frame flat with the bottom of the folding tent stove . 

We can use the ashes rake to remove the ashes after burning.

The reinforcing plate of the tail plate can ensure that the tail plate will not be warped.

NEW TOP COVER LOCK CATCH

FRONT DOOR AIR INTAKE

T-Brick Ultra Collapsible Wood Stove has a door with a slidable air intake and an octagonal glass, so that you can fine-tune the burn rate. 

The area of the air intake was increased, which allows the camping tent stove to heat up the tent in a very short time in the cold winter.

NEW STOVE BAG

The new designed Folding Wood Stove bag is more durable, with YKK zipper, more portable.