-
-
- T-Brick Series 2022
- T-Brick Altay Mirror T-Brick Altay T-Brick Ultra T-Brick Max T-Brick T-Brick Mini
- Dweller Series 2023
- Dweller Max 2.0 Dweller Max Dweller Dweller Ti Dweller Ti - Segmented Chimney Version
Cart
T1 Ultra 3 | Fastfold Titanium Wood Stove | POMOLY New Arrival 2023
-
Detail
- Product Name: T1 Ultra 3 | Fastfold Titanium Wood Stove | POMOLY New Arrival 2023
- Item NO.: PM0173
- Weight: 3.8 kg = 8.3776 lb = 134.0411 oz
- Category: Tent Stoves > T1 2.0 Series 2023 > T1 Ultra 3
- Tag: tent stove , wood stove , titanium stove , T1 , T1 STOVE , T1 ULTRA
- Brand: POMOLY
- Creation Time: 2023-03-18
- 【2.0 Titanium Chimney】Upgrad to 7cm diameter, Improve burning efficiency.
- 【2.0 Titanium Chimney Base】Upgraded to embedded inverted. (Used with titanium section chimney)
- 【2.0 Titanium Spark Arrestor】Upgrad to 7cm diameter, ultralight design, the protruding part is used to absorb sparks.
- 【2.0 Firebox Bottom Plate】Add air intakes on both sides of the bottom plate, reduce the blackening of the glass and improve the burning efficiency at the rear.
- 【TA1/GR1 Titanium】Precision-crafted in GR1 Titanium that will never rust or corrode, ideal for as a heat source for a hot tent or cooking meals in the wilderness.
- 【Refractory Glass Window】The glass viewing window creates a pleasing atmosphere.
- 【Better Heat Transference】Normally you can drink hot coffee within 10 minutes and it can increase the temperature inside the tent in a short time.
- 【Three-Dimensional Strengthening Firebox】 Enhance the rigidity of the stove and minimize deformation.
- 【Three-Dimensional Reinforced Top Cover】 Strengthen the rigidity of the top cover and further reduce the deformation of the top.
- The Cut-proof gloves is to prevent scratches when rolling up the titanium stovepipe.
The Strongest T1
Reinforced structure top cover
Strengthening stove body
New air intake baseplate
Overall 1mm thickness pure titanium
New titanium spark arrestor
Adjustable and detachable damper
Hollow whole plate folding stove legs
WHAT'S INCLUDED:
T1 Ultra 3 2.0
Titanium Chimney
Stove Bag
Chimney Damping Base
Spark Arrestor with 3 Rings
Cut Resistant Gloves
*Tools (titanium screw and wrench)
NEW BASEPLATE with ADJUSTABLE AIR INTAKE
Increase the intake air volume of the firebox.
Tail air intake can reduce carbon deposits caused by incomplete burning of firewood.
2.0 TITANIUM CHIMNEY SYSTEM - 7cm / 2.76in
Ultralight spark arrestor, three detachable rings for wind ropes fixing.
Reduce the hollow area, the convex is good for catching sparks.
Upgraded to embedded inverted. (Used with titanium section chimney)
NEW REINFORCED STRUCTURE TOP COVER
The three-dimensional hollowed-out reinforced plate minimizes the deformation of the top cover.
Reduce the direct contact between the flame and the top central area to avoid local high temperature and local low temperature, resulting in uneven heating of the top cover.
After testing, the reinforcing plate can not only strengthen the top cover, but also maximize the heating range of the top cover.
Tips: The stove must be fixed with guy-lines during burning, if the chimney is not fixed, the chimney will sway from side to side, which will cause the top cover of the stove to rise and fall continuously, which will eventually cause the top cover to warping.
NEW REINFORCED BASEPLATE
Under the condition of ensuring light weight and portability, T1 Ultra 3 2.0 adopts a double-row three-dimensional reinforced bottom plate. The 25 welding points minimize the deformation of the furnace after burning. 12 hollow octagons can enhance the heat dissipation effect.
After the stove has been burned for many times, the bottom of the firebox will be partially warped (Caused by thermal expansion and contraction), but under the action of the external reinforced plate, the whole firebox is still in a state of no deformation, which is convenient for the next installation and use.
NEW FOLDING LEGS
T1 Ultra 2.0 legs are made of a whole piece of titanium plate, which has a stronger bearing structure.
The raised design in the middle of the stove legs are suitable for uneven ground.
STOVE DOOR
The door of the T1 2.0 stove was widened and heightened so that large pieces of wood to enter the stove easily.
The edge of the door was 90-degree folded and 360-degree folded processing. The 90-degree edge can strengthen
the structure of the door frame, and the 360-degree folding can keep the door frame flat with the bottom of the stove.
We can use the ashes rake to remove the ashes after burning.
MORE PRECISE HINGES
In order to reduce the gap between the hinges and greatly reduce the risk of smoke leakage, we have remanufactured a new hinge mold, making the 2.0 version of the hinge more precise and tight.
FRONT DOOR AIR INTAKE
T1 Ultra 2.0 stove has a door with a slidable air intake, so that you can fine-tune the burn rate.
The area of the air intake was increased by 10%, which allows the stove to heat up the tent in a very short time in the cold winter.
POMOLY T1 Ultra Series 2023

You May Also Like
- Contact Us
- Company Info
- NEWS
- About us
- Pomoly Name
- Leave-No-Trace
- Contact Now
- Facebook Group
- YouTube Learning
- Product News
- Contact Us
- Topic Collections
- Policies & Terms
- Payment Policy
- Shipping Policy
- Return & Refund
- Privacy Policy
- Terms of Use
- Tax Policy
- Website Disclaimer
- Safety Disclaimer
- Warranty Policy
- Promotion Policy
- Pre-order Policy
- INTELLECTUAL PROPERTY RIGHTS
- Dealers Agreement And Terms
- User Center
- Forget Password
- My Orders
- Tracking Order
- My Account
- Register
Customer Reviews