Copy and share this link on social network or send it to your friends
Copy
Product Name | POMOLY T1 Woods Night | Fastfold Titanium Wood Stove for Camping and Hunting | POMOLY Winter Edition |
Item NO. | T1906 |
Weight | 4.5 kg = 9.9208 lb = 158.7328 oz |
Category | Titanium Wood Stoves > T1 Woods Night - Limited |
Brand | POMOLY |
Creation Time | 2020-08-16 |
NOTE: Delivery Time Adjustment Notice
Estimated Delievery Time: 5-7 days, Free Shipping!
POMOLY T1 "WOODS NIGHT" - Limited Edition -
Titanium Camping Tent Wood Stove
WHY T1 ? - Material - 1mm Thickness Titanium - Unique in the world - Deform Resistance
POMOLY T1 Stove “Woods Night" is made from 1mm thickness TA1/GR1 titanium, it’s portable and lightweight at just 9.9lb / 4.5kg. Compared with other materials, titanium is high-strength metal. Ideal for as a heat source for a hot tent in winter or cooking meals in the wilderness.
POMOLY T1 "Woods Night" Titanium Wood Stove
Youtube Channel: Lonewolf 902
OUR ORIGINAL INTENTION
Produce high quality titanium wood stoves for camping and cooking.
We hope that high-quality titanium wood stove will be accepted by most camping enthusiasts.
SURFACE POLISHING TREATMENT
Improves fatigue resistance of metal
GR1 MATERIAL
Corrosion and rust resistance, Better Plasticity and Toughness. (Compare the GR2)
3 FIREPROOF GLASS
Observe the burning situation
MELTING POINT
Over 3000°F / 1678℃
“MAGIC” STOVE PIPE
Length: 9.5in Roll up, 9.84ft(3m) Unfold
ADJUSTABLE PIPE CONNECROR
Suitable for other Titanium pipes
FUNCTIONAL AND DETACHABLE DAMPER
Control the intensity of the wood burning
SLIDING INTAKE CONTROL
Control wood burning rate
AIRTIGHT MANUFACTURING TECHNIQUE
Prevent smoke and leakage
FAST FOLDING DESIGN
Suitable for backpacking
REINFORCEMENT TREATMENT
Enhance the rigidity of the stove to decrease deformation
MORE FUNCTION
Move the head cover, burn chamber can be used as a camping firepit
WHAT'S INCLUDED:
T1 "Woods Night" Stove
Titanium Chimney
Chimney rings
Zippered Bag
Smoke Damper
Spark Arrestor
Cut Resistant Gloves
Fire Poker Stick
T1 Stove Ultralight Titanium Cooking Grate
Cooking Grate is suitable for all Pomoly T1 Stoves. Take away the top cover, just put 4 clips at the four corners, and align the grate with the four holes, and you can use it perfectly. And the four extra holes on the outside can be combined with the side shelves (Option).
T1 Stove Titanium Side Shelves
High Quality Material
The side shelves is made of titanium. This helps the shelves resist rusting. Titanium also makes it more durable than iron or stainless steel.
Use the both side shelves for cooking with camping cookwares to make delicious outdoor feasts, hot coffee, fried eggs and crispy bacon. You can put prepared food or a kettle or pan on the two side shelves, close to the stove, so the food doesn't cool quickly in winter. And can place multiple tableware at the same time.
FREE SHIPPING | FULL REFUND | SAFE PAYMENT | EMAIL SUPPORT
Copyright © 2020 Pomoly All rights reserved
2021-03-24
The wall panel thickness is thicker than any currently on the market so far, and the reinforced supports on the lid and under the belly of the stove are very impressive. The threaded side racks have a brass insert that will fall out over time so I used a pin punch to dimple the leg when it was fully threaded approximately a half centimetre or 1/16 inch from the top on four sides of each tube, this effectively stopped the brass insert from sliding out of the hollow leg just have to be careful not to crush the threaded collar into the inner threads.
On the chimney pipe I used a long smooth pole eight foot or 244 CM in length - one inch or 25.4 CM diameter to gently curve the flexible roll vertically on a very flat rubber sports floor surface of course using the cut resistant gloves and had work gloves on my helper and had the stainless rings laid out every 30 CM or one foot. Be very careful not to wrinkle or crease the pipe before it is formed in to shape and heat treated, if you take your time it will keep its shape unless you excessively fold it. Once heat treated you can roll it Horizontally as it was originally shipped and next time can be vertically rolled much easier as it has a memory to the shape it was heated.
I used a propane Torch to heat treat all surfaces first take off the rubber caps on the rack legs.
You must also be very careful because this can over heat the metal and warp it you must move and keep moving around very quickly paying close attention to the colours - colour range goes from greyish silver to orange to red to purple to blue then to white silver - never heat any part past blue colour or you can risk burning through, if you are not experienced with this I would say stick with using wood to do your first burn. Otherwise I had next to no warping by doing this method but I also have had many years of welding experience, so if you try and fail don't ask for replacement as this is only my tip to you as a fellow consumer.
Good luck and I can't wait to take this hot tent camping.
2021-01-26
2021-01-25